Two cans. One color.
Satin Black Luna One 2.0 is the direct to surface base. The Enhancer goes straight over it and cures to a high gloss metallic. No primer, no clearcoat.
Description
Direct to surface. True 2K. A color nobody else has. The Luna One Burnt Copper Wheel Kit is a two can system built for wheels: Satin Black Luna One 2.0 lays down the direct to surface base, then the Luna One Burnt Copper Enhancer goes straight over it for a high gloss metallic finish you cannot get from a single can. No primer. No clearcoat. Scuff, clean, spray black, spray color.
What is in the box
- 12 to 19 inch wheels: 3 cans Satin Black Luna One 2.0 + 3 cans Luna One Burnt Copper Enhancer
- 20 inch and up: 4 cans Satin Black Luna One 2.0 + 4 cans Luna One Burnt Copper Enhancer
- Red scuff pads and isopropyl alcohol wipes for prep
Both kits cover the faces of four wheels. Doing inner barrels too? Double the cans.
One kit. Three distinct looks.
- 1 coat of Enhancer, mild enhancement: metallic shimmer and color while the Satin Black base still shapes the finish. A darker, more understated metallic.
- 2 coats, rich metallic depth: more coverage, more pronounced color, deeper tones. A semi opaque finish that balances the black base with the metallic effect.
- 3 coats, full metallic transformation: the fully opaque Burnt Copper you see on our wheels. Spray the same number of coats on all four wheels and they match.
High gloss 2K performance
Both cans are true 2K coatings that activate in the can: pull the pin, rotate it a full turn, shake for 2 minutes, and the can is good for 24 hours. The Enhancer delivers its high gloss straight from the nozzle, so there is no clearcoat to buy and no primer underneath. The hardened, crosslinked film stands up to heat, brake dust, road grime and chemicals.
How it goes on
Scuff the faces with the red pads, wipe with the alcohol wipes, spray the Satin Black and let it dry to the touch, about 1 hour. Then the Enhancer, 1 to 3 coats. Dust free in 20 to 30 minutes, touch dry in 1 to 2 hours, mount the wheels after 24 hours. The step by step guide and the FAQ are just above.
Luna One Enhancers. Build your color. Control your finish. Make it yours.
Permanent coating. Not peelable. Hand wash only for the first 30 days, no acid wheel cleaners.
Add Essentials
$10.30
Spray Trigger
Snaps on to the Aerosol Cans - allows you to comfortably spray large areas, or for long...
$29.80
Brake Dust Professional™ Wheel Cleaner (BDP)
Never touch your wheels again! Brake Dust Professional or BDP s the ultimate touch-less wheel...
$39.95
3M Respirator
For your Dip project consider wearing the 3M Half-Face Paint Spray Respirator Assembly Mask. This...
$9.42
PreDip Spray™
Use Before Dipping PreDip Spray™ is recommended for EVERY Dip. Use PreDip to prepare surfaces for...
Luna One Burnt Copper Wheel...
12"-19"Recibe una notificación cuando este artículo esté nuevamente en stock
Presiona y arrastra para ver
True 2K, activates in the can
Direct to surface, no primer
No clearcoat needed
Mount the wheels after 24 hours
Permanent, not peelable
-
1. Satin Black Luna One 2.0
Scuff, clean, then one light, one medium and one wet coat. Let it dry to the touch, about 1 hour.
-
2. Luna One Enhancer
Pull, rotate, shake. Then 1, 2 or 3 coats straight over the black. More coats, brighter and more opaque color.
-
3. Your color, high gloss
A true 2K finish straight from the can. Mount the wheels after 24 hours. Full cure in 30 days.
Your Kit Includes
Always Included
Luna One Scuff Pads (Pack of 3)
IPA Wipes (Pack of 3)
The whole job, six steps
How you paint wheels with a Luna One Enhancer kit
Two cans, no primer, no clearcoat. Satin Black first, your color on top, mount the wheels the next day.
1
Prep the wheels
Wash off brake dust, tar and wax. Scuff the whole face with the red pads, into every spoke and lug pocket, until it is uniformly dull. Blow off the dust and wipe with the alcohol wipes.
2
Activate the Satin Black
Pull the pin all the way out, rotate it a full 360 degrees, then shake for 2 minutes. Once activated a can is good for 24 hours, so plan to do all four wheels in one session.
3
Spray Satin Black Luna One
5 to 6 inches from the wheel. One light coat, one medium coat, one wet coat, with 3 to 6 minutes between coats depending on temperature. Hit the inside edges of the spokes every pass. Then let the black dry to the touch, about 1 hour, and keep it dust free while it flashes.
4
Activate the Enhancer exactly like step 2
Pull the pin all the way out, rotate it a full 360 degrees, then shake for 2 minutes. Once activated the can is good for 24 hours, so do all four wheels in the same session.
5
Spray Luna One Enhancer
5 to 6 inches from the wheel, even overlapping passes, with 3 to 6 minutes between coats depending on temperature. 1 coat for a dark metallic tint, 2 for rich depth, 3 for the full color. Same count on all four wheels, inside edges of the spokes every pass.
Cure and mount
Dust free in 20 to 30 minutes, touch dry in 1 to 2 hours. Mount the wheels after 24 hours. Hand wash only for 30 days, no acid wheel cleaners. No clearcoat needed, the Enhancer is the finish.