Two cans. One color.
Satin Black Luna One 2.0 is the direct to surface base. The Enhancer goes straight over it and cures to a high gloss metallic. No primer, no clearcoat.
Description
Take your Luna One finish to an entirely new level. Luna One Enhancers are a lineup of high gloss, 2K metallic finishes designed to transform Satin Black Luna One 2.0 into something extraordinary. The Burnt Copper Enhancer puts you in complete control of the final look: a rich metallic effect that builds in intensity, color and coverage with every coat. A subtle metallic accent, a dramatic shift, or a bold fully opaque metallic. The choice is yours.
One can. Three distinct looks.
- 1 coat, mild enhancement: a layer of metallic shimmer and color while the Satin Black base still shapes the finish. A darker, more understated metallic.
- 2 coats, rich metallic depth: more metallic coverage, more pronounced color, deeper and richer tones. A semi opaque finish that balances the black base with the metallic effect.
- 3 coats, full metallic transformation: a fully opaque Burnt Copper with maximum color, coverage and visual impact. This is the finish on our wheels.
High gloss 2K performance
Each aerosol is a true 2K coating that activates in the can and delivers a high gloss finish straight from the nozzle. No clearcoat is needed to get that rich, glossy look, and no primer underneath. The hardened, crosslinked film stands up to heat, brake dust, road grime and chemicals.
Seven colors. Endless creative potential.
Carbon Gold, Hyper Silver, Top Secret Gold, Burnt Copper, Obsidian, Hyper Holographic and Neochrome. Seven distinct colors that deliver dramatically different results depending on how many coats you spray. Go subtle. Go bold. Or go all in.
What you need
- Satin Black Luna One 2.0 as the base. Spray it first and let it dry to the touch, about 1 hour, then spray the Enhancer straight over it. Sold separately, or get the Luna One Burnt Copper Wheel Kit for wheels.
- Luna One Burnt Copper Enhancer: one can covers about the same area as one can of Luna One.
- Red scuff pads and isopropyl alcohol for prep.
Available as a Single, 3-Pack or 6-Pack. The 3-Pack covers the faces of four wheels up to 19 inches with three coats.
Luna One Enhancers. Build your color. Control your finish. Make it yours.
Designed for application over Satin Black Luna One. Final color and coverage vary with the number of coats applied. Permanent paint, not peelable.
Add Essentials
$5.10
Luna One Scuff Pads (Pack of 3)
$3.30
IPA Wipes (Pack of 3)
$20.00
Luna One Tire Masking Covers (Set of 4)
Luna One Tire Masking Covers (Set of 4)
Presiona y arrastra para ver
True 2K, activates in the can
Direct to surface, no primer
No clearcoat needed
Reassemble after 24 hours
Permanent, not peelable
-
1. Satin Black Luna One 2.0
Scuff, clean, then one light, one medium and one wet coat. Let it dry to the touch, about 1 hour.
-
2. Luna One Enhancer
Pull, rotate, shake. Then 1, 2 or 3 coats straight over the black. More coats, brighter and more opaque color.
-
3. Your color, high gloss
A true 2K finish straight from the can. Reassemble after 24 hours. Full cure in 30 days.
The whole job, six steps
How to use a Luna One Enhancer
Two cans, no primer, no clearcoat. Satin Black first, your color on top, back together the next day.
1
Prep the surface
Clean off dirt, grease and wax. Scuff thoroughly with red scuff pads until the whole surface is uniformly dull and matte. Blow or wipe off the dust, wipe with isopropyl alcohol and let it dry.
2
Activate the Satin Black
Pull the pin all the way out, rotate it a full 360 degrees, then shake for 2 minutes. Once activated a can is good for 24 hours, so plan to use it the same day.
3
Spray Satin Black Luna One 2.0
5 to 6 inches from the surface. One light coat, one medium coat, one wet coat, with 3 to 6 minutes between coats depending on temperature. Then let the black dry to the touch, about 1 hour. Every Enhancer color is designed over Satin Black, so the base is part of the color.
4
Activate the Enhancer exactly like step 2
Pull the pin all the way out, rotate it a full 360 degrees, then shake for 2 minutes. Once activated the can is good for 24 hours, so plan to use it the same day.
5
Spray Luna One Enhancer
5 to 6 inches from the surface, even overlapping passes, with 3 to 6 minutes between coats depending on temperature. 1 coat for a mild metallic tint, 2 for rich depth, 3 for the full opaque color.
Let it cure
Dust free in 20 to 30 minutes, touch dry in 1 to 2 hours, reassemble after 24 hours, full cure in 30 days. No clearcoat on top, the Enhancer is the finish.