Ir directamente a la información del producto
Ral Violett 3050 | Luna OEM Basecoat - Gallon
Ral Violett 3050 | Luna OEM Basecoat
3050 Violett RAL
Finish Solid
Chemistry 2K basecoatBasecoat, ready to spray1K gloss touch-up
OEM verified formula

RAL Violett 3050

Luna OEM basecoat, mixed to the factory formula

$502.25

Select size

Most orders ship same day

No undercoat needed. This color sprays over sanded paint or primer.

FULL RESPRAY: SPRAY GUN SIZES

1. Prep and clean. Wash the panel, degrease with a 50/50 isopropyl mix and scuff the whole area with a gray scuff pad. Paint only sticks to clean, dulled surfaces.

2. Prime bare surfaces. Painting bare metal or raw plastic? Apply epoxy primer first, with adhesion promoter on plastics. Repairs with filler or deep scratches need a primer filler. You will find both in Project Essentials and the Kit Builder.

3. Undercoat. Spray the required undercoat in 1 to 2 even coats and let it flash for 15 to 20 minutes. It is included with your paint automatically.

4. Color basecoat. Apply 2 to 3 medium coats, 15 to 20 minutes between coats. Keep the gun 6 to 8 inches from the panel and overlap each pass by half. On pearls and metallics the final, lighter coat sets the effect.

5. 2K Clearcoat. Finish with 2 wet coats of 2K clear for gloss and protection.

6. Cure and aftercare. Dust-free in about an hour, full hardness in 5 to 7 days. Hand-wash only for the first 30 days.

PANELS AND PARTS: THE AEROSOL

1. Prep and clean. Wash the panel, degrease with a 50/50 isopropyl mix and scuff the whole area with a gray scuff pad. Paint only sticks to clean, dulled surfaces.

2. Prime bare surfaces. Painting bare metal or raw plastic? Apply epoxy primer first, with adhesion promoter on plastics. Repairs with filler or deep scratches need a primer filler. You will find both in Project Essentials and the Kit Builder.

3. Undercoat. Spray the required undercoat in 1 to 2 even coats and let it flash for 15 to 20 minutes. It is included with your paint automatically.

4. Color basecoat. Shake the can well. Apply 2 to 3 medium coats, 15 to 20 minutes between coats. Hold the can 6 to 8 inches from the panel and overlap each pass by half. On pearls and metallics the final, lighter coat sets the effect.

5. Clear. Finish with 2 wet coats from a 2K clear aerosol for gloss and protection.

6. Cure and aftercare. Dust-free in about an hour, full hardness in 5 to 7 days. Hand-wash only for the first 30 days.

CHIPS AND SCRATCHES: THE 2OZ 1K TOUCH UP

The 2oz bottle is a 1K gloss formula: it air-dries glossy straight from the bottle, so there is no clearcoat step at all.

1. Clean the chip. Wash the spot and degrease with isopropyl. Pick out any loose or flaking paint first.

2. Fill in thin layers. Dab paint into the chip with the built-in brush. Build it up in several thin layers, letting each one dry, until the paint sits just proud of the surface.

3. Let it harden. Leave the repair to harden fully, ideally overnight, before leveling.

4. Level with 3000 grit. Wet-sand the spot with 3000 grit sandpaper until the repair sits flush with the surrounding paint.

5. Hand polish. Polish the area by hand to bring back the full gloss. Skip blending solutions: leveling and polishing gives a cleaner, longer-lasting finish.

Where to find your paint code

Open the driver-side door and look for a sticker on the door frame or the B-pillar. The paint code is typically labeled "C/TR" (color/trim), "Paint Code", "EXT COL", or similar.

This color's code is 3050, 4 characters. Match it to the label before you order.

VEHICLE IDENTIFICATION ────────────────────────── 3050

Look for the row naming the color or paint

Will it match?

Luna OEM is mixed from the manufacturer's formula for your code, not matched by eye. It is a 2K basecoat, the same chemistry a body shop sprays.

  • Mixed to order, so it arrives the way the factory specified it.
  • Faded or chalky paint will read lighter than the new panel until it is polished. Blend into the next panel on anything older than ten years.
  • Metallics and pearls need the same spray gun setup as the original. The application guide covers it.

Paint characteristics

Coats needed
1Color basecoatColor basecoat1K gloss touch-up 2 to 3 coats2 to 3 coatsThin layers, dabbed in with the brush
2 2K clearcoat2K clear aerosolLevel and polish 2 coats2 coats from the can3000 grit, then by hand. No clearcoat

Dry time 15 to 20 min between coats15 to 20 min between coatsEach thin layer dries, then overnight before leveling

What arrives, Aerosol

  • 1 x aerosol of 3050 Violett 2K basecoat, mixed to the formula and ready to spray
  • Shake, spray, no mixing or gun needed

Clearcoat is separate: every basecoat needs 2 coats of 2K clear.

Finish the job

A clear kit sized for your paint, and a spray gun to spray it.Clearcoat, primer and prep in aerosol cans, to go with yours.A chip repair needs little more than the bottle. Level it with 3000 grit wet sandpaper, then polish by hand. The application guide walks through it.

Pick a size to see what finishes it.

Questions

No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. Larger sizes are standard basecoat and need a 2K clearcoat.

No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. The aerosol is standard basecoat: finish it with a 2K clear aerosol.

No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. Once it has hardened, level it with 3000 grit and polish by hand.

Luna basecoats come ready to spray: mix, filter and spray with an HVLP gun, 2 to 3 coats, then 2 coats of 2K clear. The application guide walks through prep, flash times and cure.

The aerosol is ready to spray: shake the can well, then 2 to 3 medium coats and 2 coats from a 2K clear aerosol. The application guide walks through prep, flash times and cure.

No mixing and no spraying. Shake the bottle, dab thin layers into the chip with the brush in the cap, let it harden, then level with 3000 grit and polish by hand. The application guide walks through each step.

Reviews

No reviews of this color yet