Plasti Dip Glossifier must be applied over a solid base (minimum 6 coats) of Plasti Dip, they are not a stand-alone product. The more coats of Glossifier you apply, the more of a gloss effect will be produced. A couple quick coats may product a cloudy finish, so solid wet coats are suggested. You should be going for full coverage for an even finish.
Plasti Dip protects dipped surfaces from acids, abrasion, corrosion, impact, salts, moisture and weathering. It remains flexible, stretchy and will not crack, or become brittle in extreme temperatures when applied correctly.
Glossifier is NOT COMPATIABLE with HyperDip® Aerosol Cans
Temperature guidelines: Ideal temps for application range from 30F - 95F. In any climate, warming your cans in warm water prior to application dramatically helps achieve a smoother finish.
Test all applications in a small inconspicuous area to make sure it will meet your expectations and is suitable for each unique surface. Although Plasti Dip has proven to be safe and predictable, every surface is unique and it's impossible to predict how each surface will react.
Clean each surface with PreDip Spray to remove any dirt, debris, oils, waxes, grease, or loose rust, then let dry completely before spraying Plasti Dip. Coat each dipped surface with DipCoat Protective Spray 4 hours after dip has dried for best results.
California residents see Prop 65 WARNINGS