Check your car
Pick your model and yearWhere to find your paint code
Open the driver-side door and look for a sticker on the door frame or the B-pillar. The paint code is typically labeled "C/TR" (color/trim), "Paint Code", "EXT COL", or similar.
This color's code is 540-M, 4 characters. Match it to the label before you order.
Look for the row naming the color or paint
Will it match?
Luna OEM is mixed from the manufacturer's formula for your code, not matched by eye. It is a 2K basecoat, the same chemistry a body shop sprays.
- Mixed to order, so it arrives the way the factory specified it.
- Faded or chalky paint will read lighter than the new panel until it is polished. Blend into the next panel on anything older than ten years.
- Metallics and pearls need the same spray gun setup as the original. The application guide covers it.
What arrives, Aerosol
- 1 x aerosol of 540-M Dark Violet M. 2K basecoat, mixed to the formula and ready to spray
- Shake, spray, no mixing or gun needed
Clearcoat is separate: every basecoat needs 2 coats of 2K clear.
Finish the job
A clear kit sized for your paint, and a spray gun to spray it.Clearcoat, primer and prep in aerosol cans, to go with yours.A chip repair needs little more than the bottle. Level it with 3000 grit wet sandpaper, then polish by hand. The application guide walks through it.
Pick a size to see what finishes it.
Questions
No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. Larger sizes are standard basecoat and need a 2K clearcoat.
No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. The aerosol is standard basecoat: finish it with a 2K clear aerosol.
No. The 2oz touch-up uses our 1K gloss formula that dries glossy straight from the bottle. Once it has hardened, level it with 3000 grit and polish by hand.
Luna basecoats come ready to spray: mix, filter and spray with an HVLP gun, 2 to 3 coats, then 2 coats of 2K clear. The application guide walks through prep, flash times and cure.
The aerosol is ready to spray: shake the can well, then 2 to 3 medium coats and 2 coats from a 2K clear aerosol. The application guide walks through prep, flash times and cure.
No mixing and no spraying. Shake the bottle, dab thin layers into the chip with the brush in the cap, let it harden, then level with 3000 grit and polish by hand. The application guide walks through each step.












