Intense Teal Basecoat
Choose Your Size
Help
Small Kit:Β ATV, 4-Wheeler, Slingshot, etc. This kit is not intended for cars. If in doubt please upgrade to the Medium
Medium Kit:Β Porsche 911, BMW 3 Series, Ford Mustang, Subaru WRX, Audi A4 or Similar. If in doubt, please upgrade to the Large
Large Kit:Β Audi A7, BMW 5 Series, Mercedes S Class, CX-5 or similar. If in doubt, please upgrade to the Extra Large Kit
Extra Large Kit:Β Ford F-150, Chevy Tahoe, Audi Q7, Ram 1500, Hummer H2 or Similar
"Good condition" paint will not require Primer. This would include a vehicle free of flaking clear coat, deep scratches, pitting, rust, and no need for repairs. Faded clearcoat and surface scratches are fine, as long as the clearcoat is fully intact.
"Has Issues" would include everything else, and would require Primer. If your vehicle includes any of the issues listed above, OR you're unsure if you need Primer, it's always safer to include Primer in your Kit.
VHSΒ is our premium Clearcoat. This is for painters who want the highest quality finish available. Extremely high solids with a deep gloss, superior leveling and incredible clarity. The best of the best.
StandardΒ is our mid-level Clearcoat. Still an excellent finish and value, designed for painters looking to prioritize cost over premium materials.
| What Sprayer Can I Use? | DYC Ultimate Sprayer | Fuji Semi-Pro | RP / HVLP Paint Gun |
Product Description
Unleash theΒ next evolution of paint technologyΒ withΒ Luna Performance Series. TheseΒ high-quality hybrid formulasΒ fuse the brilliance ofΒ pearl and metallic effectsΒ with rich toners, creatingΒ stunningly complex colorsΒ paired with easy application. Engineered for both beginner painters and professionals, this innovative blend ensuresΒ flawless application, smooth coverage, and a dynamic finishΒ that stands out in any lighting.
- Ready to SprayΒ β No reduction required.
- Hybrid Pearl & Metallic FormulaΒ β Delivers deep, multi-dimensional color with a premium finish.
- Incredible Complexity & DepthΒ β Advanced toners enhance vibrancy, coverage and richness.
- Easy to SprayΒ β Smooth, even application for painters of all skill levels.
- Versatile & High-PerformanceΒ β Perfect for automotive, motorcycles,and custom projects and more.
Elevate your paint game withΒ Luna Performance Seriesβwhere cutting-edge formulation meets effortless perfection.
Do I need a Basecoat?
Basecoats:Β These doΒ not require a basecoat, but weΒ highly recommend using a primerΒ first for best adhesion and finish quality. You can view our recommended Primers here.
Midcoats:Β TheseΒ do require a basecoat. For the best color accuracy and performance, we recommend one of ourΒ Luna BasecoatsΒ β available here.
Do I need a Clearcoat?
Yes! All of our Luna Permanent Paint products require a TopCoat. We recommend the VHS Crystal Premium Clearcoat or the Standard Gloss Clearcoat.
Application Guide (4 OZ, Quarts and Gallons)
Preparation
- Surface Prep: Clean thoroughly to remove dust, grease and old coatings. Lightly scuff or sand smooth surfaces (P400βP600 grit) to promote adhesion. Wipe with a breathable tack cloth or isopropyl alcohol.
- Primer: If you have exposed metal or need to repair large areas we would suggest using our UHS Primer (Panels should be sanded no higher than P400 grit).
- Environment: Ideal temperature 65β75 Β°F (18β24 Β°C). Relative humidity 40β60 %. Spray in a well-ventilated area or booth to avoid overspray buildup.
- Personal Protection: Wear a properly fitting respirator rated for solvent vapors. Use nitrile gloves and safety goggles. Keep working area free of open flames or sparks.
Mix Well
- Mix the Paint well as pigments may have settled during transport.
- Test-spray on a disposable card or scrap piece to check atomization, color and coverage before applying.
Spraying Technique
- Spray 2 x 75% Wet coats for full coverage with a 10-15 minute flash between coats.
- Midcoats, Pearls & Metallics will all need a β3rd Coatβ which should be βControlΒ orΒ EffectΒ coatβ. If you are unsure, please ask for the Luna Technical Department when contacting customer service. When spraying these types of paints, take your time and apply even coats.Β
- Use smooth, even passes, overlapping each pass by 50 % for uniform coverage.
Drying before Clearcoat
- Flash Between Coats: Allow each coat to fully flash (no longer tacky) before recoating to prevent runs and orange peel.
- After the final coat of color, wait 30 minutes before applying our VHS or Standard Clearcoat
Application Guide (Aerosols)
Preparation
- Surface Prep: Clean thoroughly to remove dust, grease and old coatings. Lightly scuff or sand smooth surfaces (P400βP600 grit) to promote adhesion. Wipe with a breathable tack cloth or isopropyl alcohol.
- If you are painting on uneven painted surfaces or bare metal you should consider one of our Primer Aerosols
- Environment: Ideal temperature 65β75 Β°F (18β24 Β°C). Relative humidity 40β60 %. Spray in a well-ventilated area or booth to avoid overspray buildup.
- Personal Protection: Wear a properly fitting respirator rated for solvent vapors. Use nitrile gloves and safety goggles. Keep working area free of open flames or sparks.
Shake & Test
- Shake the can vigorously for 45β60 seconds, inverting several times to mix pigments and metallic flakes.
- Test-spray on a disposable card or scrap piece to check atomization, color and coverage before applying to the final part.
Spraying Technique
- Hold the can 5β6 inches (12β15 cm) from the surface, perpendicular to the panel. Do not tilt.
- Use smooth, even passes, overlapping each pass by 50 % for uniform coverage.
- Depress the trigger fully for consistent flow; release fully between passes to avoid drips.
- Move the can at a steady speed
Layering & Coverage
- Solid colors: ApplyΒ twoΒ coats (~85 % coverage each), letting each flash for 2β3 minutes before the next.
- Pearl / Metallic colors: ApplyΒ twoΒ coats as above butΒ finishΒ with aΒ lighterΒ 3rd coatΒ doubleΒ the distance from the item you are spraying to achieve the βControlΒ orΒ EffectΒ coat.
- Flash time 5β10 minutes.
Drying before Clearcoat
- Flash Between Coats: Allow each coat to fully flash (no longer tacky) before recoating to prevent runs and orange peel.
- After the final coat of color, wait 30 minutes before applying our 2K Clearcoat Aerosol.
Cleanup & Storage
- Cap Clearing: turn the can upside down and spray until only propellant comes out - his keeps the valve and cap clean.
- Nozzle Care: Remove and clean with solvent (do not soak)
- Storage: Store cans upright in a cool, dry place away from direct sunlight. Avoid freezing or temperatures above 120 Β°F (49 Β°C).
Technical Data Sheet
California residents see Prop 65 WARNINGS.
Build Your Car Kit
This is a test modal! If you can see this, the modal is working.