• Sagola 3600 XPT angled Side View With Regulator Clear Air Cap
  • Sagola 3600 XPT Close Up Shot
  • Sagola 3600 XPT Air Cap Specs
  • Sagola 3600 XPT Side View With Regulator
  • Sagola 3600 XPT angled Side View With Regulator Base Air Cap
  • Sagola 3600 XPT angled Side View With Regulator
1 / 1
Description

The Sagola 3600 XPT is a pro-grade gravity spray gun built for clean, repeatable finishes with less waste. Tuned atomization, precise fan/product control, and rugged wetted materials make it a reliable choice for automotive refinish, wood finishing, plastics, and general industrial coatings.

Sagola 3600 XPT Spray Gun

$560.00
4 payments from $140.00 with
  • Factory-matched aircaps —XPT CLEAR, XPT BASE,
  • Real-world pressure guidance
  • Air consumption you can plan for —~285 L/min on
Air Cap: Base
Needle/Nozzle: 1.20mm

Tech Specs

3600 XPT Series
Weight 0.97 lb
Dimensions 6.5 x 0.75 x 6.96 "
Air Inlet BSP 1/4 M
Temperature range 32 to 140F
Product Inlet M12 x 1.5 F
Maximum Air pressure 4 bar, 58 psi
Recommended air pressure 1.4 to 2.2 bar, 20.3 to 31.9 psi
Recommended air pressure HVLP 1.8 bar, 26 psi
Materials in contact with product Anodized aluminum, STAINLESS steel, PTFE, POM and Nylon
Recommended EPA aircaps application distance 15 to 20 cm., 5.9 to 7.9 inches
Recommended HVLP aircaps application distance 12 to 15 cm., 4.7 to 6 inches
Air consumption ~285 L/min (CLEAR/BASE); ~360 L/min (HVLP)
Tip/needle options Ø 1.2 / 1.3 / 1.4 (kits)
Operating temp 0–60 °C (32–140 °F)
ATEX Non-electrical II 2G T4 x (use earthing/static-free hoses)
View details

Add Essentials

Air Caps | Sagola 3600 XPT
$117.00
Air Caps | Sagola 3600 XPT
Get the best replacement for your 3600 XPT aircap with a Sagola OEM replacement.  
Needle Nozzle Kits | Sagola 3600 XPT
$120.50
Needle Nozzle Kits | Sagola 3600 XPT
The Sagola 3600 XPT Needle Nozzle kit is designed to work with any Sagola 3600...
Sagola Disposable Paint Cup Adapters
$30.00
Sagola Disposable Paint Cup Adapters
Use the Sagola Disposable Paint Cup system with every spray gun in your arsenal. These...
Cup Adapter | Sagola 3600 XPT, 3400 Mini, 3300 GTO, 2100 XD, X 4100
$29.00
Cup Adapter | Sagola 3600 XPT, 3400 Mini, 3300 GTO, 2100 XD, X 4100
Use a variety of paint cup brands with Sagola. These couplings will work with the...
  • Sagola 3600 XPT angled Side View With Regulator Base Air Cap
  • Sagola 3600 XPT angled Side View With Regulator Clear Air Cap
  • Sagola 3600 XPT Close Up Shot
  • Sagola 3600 XPT Air Cap Specs
  • Sagola 3600 XPT Side View With Regulator
  • Sagola 3600 XPT angled Side View With Regulator
1 / 1
Press & drag to view

Why finishers choose the 3600 XPT

Factory-matched aircaps

—XPT CLEAR, XPT BASE, and XPT HVLP—so you can dial in atomization for clear, base, or compliant work.

Real-world pressure guidance

recommended 1.4–2.2 bar (20.3–31.9 psi); HVLP 1.8 bar (26 psi) for transfer efficiency and control.

Air consumption you can plan for

—~285 L/min on CLEAR/BASE and ~360 L/min on HVLP.

Built to last

wetted parts in anodized aluminum, stainless steel, PTFE, POM, and nylon

Application sweet spot

Run the gun in its recommended window—start near 2.0 bar for CLEAR/BASE, or 1.8 bar for HVLP—then trim fan and product for pattern and flow. Keep the gun perpendicular and within the advised distance: EPA 15–20 cm; HVLP 12–15 cm for best transfer and finish.

Setup tips (fast, consistent results)

  • Open fan and product, spray a test pass, then close down to target flow/pattern—don’t chase finish with excess pressure.
  • Use clean, dry air with coalescing filtration; size compressor volume to match your chosen aircap
  • Maintain perpendicular gun travel and consistent distance to maximize transfer.

Safety & compliance

Do not exceed 4 bar static pressure. For ATEX areas, ground the equipment and use static-free air hoses. Follow manufacturer safety guidance for coating materials and thinners.

  • Interchangeable Parts
  • Consistent high quality finishes
  • Low Maintenance

Manuals & Docs

Complete your setup

Recently viewed